The Fire Solution

• 2 Kg
• 4 Kg
• 6 Kg
• 9 Kg

A UL Listed Clean Agent Gas System is a fire suppression solution designed to protect sensitive equipment, critical infrastructure, and areas where water-based systems could cause damage. These systems use clean agents—gaseous fire suppressants that are electrically non-conductive, leave no residue, and extinguish fires quickly without harming the environment or assets.

Key Features:

• UL Listed: Certified by Underwriters Laboratories (UL), ensuring compliance with strict safety and performance standards.

• Rapid Fire Suppression: Detects and suppresses fires within seconds to minimize damage.

• Clean Agent Technology: Uses gases like FM-200 (HFC-227ea), Novec 1230, or Inergen, which are safe for electronics and sensitive materials.

• Automatic & Manual Activation: Can operate automatically via smoke/heat detection or manually through a control panel.

• Environmentally Friendly: Agents have zero or low ozone depletion potential and minimal global warming impact (depending on the agent).

• Applications: Ideal for server rooms, data centers, control rooms, museums, libraries, telecommunication facilities, and laboratories.

How it Works:

1. Detection: Fire or smoke sensors detect a fire in its early stages.

2. Control Panel Alert: The system triggers an alarm and initiates pre-discharge warnings.

3. Agent Release: The clean agent is discharged, rapidly suppressing the fire without water.

4. Safety Measures: Systems are designed with safety interlocks and venting to ensure personnel protection.

A Gas Fire Suppression System is an advanced, automatic fire protection solution designed to quickly detect and extinguish fires in enclosed or sensitive areas without causing damage to equipment or leaving residue.

These systems work by releasing a clean gaseous extinguishing agent into the protected area when a fire is detected. The gas suppresses fire either by reducing oxygen levels, interrupting the chemical reaction of combustion, or absorbing heat—depending on the type of agent used. Common agents include FM-200 (HFC-227ea), Novec 1230, CO₂, and Inert Gases such as IG-541 and IG-55.

Gas fire suppression systems are especially suitable for electrical panels, data centers, server rooms, control rooms, UPS rooms, telecom facilities, laboratories, and archives, where water-based systems could cause severe damage. The system typically consists of gas storage cylinders, control panels, smoke or heat detectors, discharge nozzles, and warning devices.

Key advantages include rapid fire extinguishing, no residue, minimal downtime, safe operation for occupied spaces (with clean agents), and environmentally friendly options. Once activated, the system suppresses the fire within seconds, preventing re-ignition and protecting valuable assets.

Gas fire suppression systems comply with international standards such as NFPA, ISO, and EN, ensuring reliable and effective fire protection for critical applications.

The Sevo Tubing Suppression System is a type of fire detection and fire suppression solution that uses special temperature-sensitive tubing to both detect heat from a fire and trigger release of a fire-extinguishing agent directly at the hazard point. It’s commonly used for protecting equipment enclosures, electrical cabinets, server racks, control panels, and other sensitive or high-value areas where early localized suppression is critical.

• Detection & Activation: A flexible polymer tube runs throughout the area to be protected. This tube is heat-sensitive and designed to burst at a specific elevated temperature caused by a fire (similar to other tube-based suppression technologies).

• Suppression Trigger: When the tube bursts at the hottest point, a pressure change or pneumatic mechanism activates the system. This triggers the release of a fire suppression agent (often a clean agent like FK-5-1-12/Novec 1230 or similar).

• Direct Discharge: The extinguishing agent is discharged directly at the source of the fire, limiting damage and preventing fire spread, while also minimizing collateral damage to sensitive electronics or equipment.

Pre-Engineered DLP (Dry Chemical Powder) Fire Suppression System

The Pre-Engineered DLP Fire Suppression System is designed for rapid and effective fire protection in areas where combustible materials or flammable liquids may pose a high risk. It utilizes dry chemical powder (commonly monoammonium phosphate or sodium bicarbonate-based powders) to suppress fires by interrupting the chemical reaction of combustion.

1. Pre-Engineered Design:

   • Factory-engineered for specific fire hazard scenarios.

   • Provides predictable coverage for areas such as commercial kitchens, machinery enclosures, electrical panels, and industrial equipment.

   • Simplified installation with minimal layout customization required.

2. Fast and Efficient Fire Suppression:

   • Discharges dry chemical powder instantly upon activation, controlling Class B (flammable liquid) and Class C (electrical) fires.

   • Rapid suppression minimizes damage to equipment and reduces downtime.

3. Activation Mechanisms:

   • Can be activated manually via pull stations or automatically using heat or flame detection devices.

   • Reliable mechanical or pneumatic actuation ensures immediate response.

4. System Components:

   • Storage Cylinders containing dry chemical powder.

   • Discharge Nozzles strategically placed for maximum coverage.

   • Control Panel for monitoring, alarm signals, and system activation.

   • Pressure or Actuation Mechanisms for rapid powder discharge.

5. Maintenance & Safety:

   • Simple maintenance with periodic inspection and cylinder refill/replacement.

   • Environmentally safer than some halogenated agents.

   • Non-conductive powder suitable for electrical fire hazards.

• Commercial kitchens and fryers

• Electrical switchgear and control panels

• Transformer and generator rooms

• Industrial machinery and equipment

• Flammable liquid storage areas

Summary:

A CO₂ (Carbon Dioxide) Gas Fire Suppression System is a clean, fast-acting fire protection solution designed to extinguish fires by reducing oxygen concentration in the protected area. By displacing oxygen below the level required to support combustion, CO₂ effectively suppresses fire without leaving any residue or causing damage to sensitive equipment.

These systems are ideal for protecting electrical and high-value assets, especially where water or foam could cause severe damage.

• Clean agent: Leaves no residue, no cleanup required

• Rapid fire suppression: Quickly controls and extinguishes fires

• Non-conductive: Safe for electrical and electronic equipment

• Total flooding or local application options available

• Automatic & manual activation systems

• Low maintenance and reliable operation

• Electrical control panels & switchgear rooms

• Data centers and server rooms

• Generator rooms

• Transformer rooms

• Industrial machinery enclosures

• Marine and engine rooms

• Effective on Class B (flammable liquids) and Class C (electrical) fires

• No damage to equipment or documents

• Compact storage cylinders

• Cost-effective for industrial use

A Fire Detection Tube Suppression System is a self-activating, automatic fire suppression solution designed to detect and extinguish fires at their source, without the need for electricity, control panels, or human intervention. It is widely used for electrical panels, machinery enclosures, engine compartments, and CNC machines.

• A flexible polymer detection tube is installed inside the protected enclosure.

• The tube is continuously pressurized with a clean fire-extinguishing agent.

• When a fire occurs, localized heat melts or bursts the tube at the hottest point.

• The tube rupture acts as a nozzle, instantly dis

Discription
Fire suppression electrical fire suppression systems use the patented detection tubing which is installed throughout the enclosure and connected to the cylinder valve. The tubing is then charged with nitrogen and this pressure is utilised to hold back the extinguishant in the cylinder.
Should a high temperature or fire occur then the pressurised tubing will burst and the extinguishant will be deployed directly from the burst hole in to the fire.
This effectively means the fire has formed the discharge nozzle so it is always exactly in the right location.
A switch is also added to the system and is held closed by the pressure. Should the tubing burst or the pressure be lost for any reason then the switch will open and this signal can be used to isolate the power and raise an alarm.

Direct Low-Pressure Clean Agent Systems are fixed fire-suppression solutions designed to protect enclosed, high-value and sensitive areas by releasing a clean extinguishing agent directly into the protected space at low storage pressure.

A Direct Low-Pressure Clean Agent System stores the extinguishing agent in liquid form at relatively low pressure and discharges it directly into the hazard area through a network of pipes and nozzles when a fire is detected. These systems suppress fire rapidly by interrupting the combustion process, without leaving residue or causing damage to equipment.

• Low storage pressure: Safer handling, reduced stress on cylinders and piping

• Direct discharge: Agent flows straight into the protected enclosure

• Clean agent technology: No residue, non-conductive and safe for electronics

• Fast suppression: Controls fire in seconds, minimizing damage and downtime

• Environmentally compliant: Zero ozone depletion and low global warming potential (depending on agent)

The Fire Solution providing the product all over in the india.

• 5 Kg
• 10 Kg
• 15 Kg

We are engaged in offering CO2 Fire Extinguisher to our clients. Our range of all products are widely appreciated by our clients.

• We are engaged in offering Fire Bucket With Stand to our clients. Our range of all products are widely appreciated by our clients.
• Also available in a 6 bucket set.

Here are some fire extinguisher options and information you might be referring to when you say “Firestop Fire Extinguishers” — including both products for personal/vehicle use and the Firestop brand of industrial safety extinguishers in India: